The cold regenerator has automatic depth control device. The load control device can keep the engine speed at peak torque for continuous high production.
1. According to the introduction of foreign construction materials, compared with the method of laying new materials on the old layer, the cost of cold in place recycling can be reduced by 20% ~ 46%
2. To improve the grade of old road, the improvement of road grade can be realized through the improvement of bearing capacity of base course, which has special significance for low-grade highway.
3. There is no weak interface between the thinner layers sometimes appeared in the traditional construction method.
4. As the cold recycling construction is a one-time operation mode, the regeneration unit only passes through the exposed subgrade once. Therefore, compared with the traditional construction method, the damage to the subgrade is less.
5. Materials are saved and all the old paving materials are used locally, thus greatly reducing the consumption of new materials and protecting resources.
6. The construction period is short, because there is no transportation problem of old materials, there is no need for other machinery to loose and crush the old materials, and there is no need to remove large pieces of materials and special crushing. More importantly, the one-time operation characteristics of the construction process greatly simplifies the construction procedure, thus saving the construction time.
7. Environmental protection, because the utilization of old materials greatly reduces the mining amount of new materials, and there is no problem of transportation and stacking of old materials, which fundamentally meets the requirements of environmental protection.
The above is about the advantages of cold regenerator in road deep turning. I believe you have already understood it. If you want to know more, please click on the rental of cold regenerator http://www.middleriveryoga.com Official website.