The width of one-time crushing and mixing of cold regenerator is 2.4 meters. When working, there is often a water tank car closely following the operation to ensure the mixing water. During the mixing process, according to the water content specified in the test sheet, it is necessary to have a water tank truck full of water and be on standby at any time. Once the water tank following the regenerator runs out of water, it needs to be replenished immediately.
When the cold recycling machine is rented, the recycled mixture needs to be mixed, and the grader should be used for preliminary shaping immediately. In straight lines and flat curved sections without superelevation, the grader scrapes from the shoulder to the center of the road. Many cold recycling machine rental, will face this point, the road surface shaping process should be timely eliminate the segregation of coarse and fine materials. On the other hand, the old road material which has not been broken is removed by manual and mechanical means. Generally, it is difficult to walk when the cold recycling machine is rented, so it is necessary to mill the old pavement layer by the cold recycling machine, and then pave cement on the crushed materials for cold recycling mixing construction.
The above are some common situations about the cold recycling machine road operation. If you want to know more about the content, please click the website, cold recycling machine leasing http://www.middleriveryoga.com 。